The C 32 machining centre can machine workpieces weighing up to 1000 kg in five axes simultaneously. The machining centre can even deal with difficult-to-machine materials in record time and perfect precision – even fully automated and always with unbeatable operating comfort! The scope of usage for the C 32 is very wide.
Insights into the C 32
- The C 32 machining centre can machine workpieces weighing up to 1000 kg in five axes simultaneously.
- The C 32 machining centre uses two axes in the workpiece and three axes in the tool.
|Traverse path||650 x 650 x 500 mm|
|Body||dia. 650 / H 420|
|Collision circle||dia. 840 mm|
|Max. vertical table clearance||600 / 635 mm|
|Rapid traverse linear X-Y-Z||(60)–45 (60)–40 (60) m/min.|
|Swivelling rotary table||dia. 650 x 540 mm|
|Max. table load||1000 kg|
“The first automated system from Kingsbury for machining calipers proved so successful that we had no hesitation in following a similar route this time. All of the production benefits apply to the second cell as well.”
– Brian Cutler, Production Engineering Manager
See how Alcon Components halved cycle times on the production of brake calipersAlcon Components Case Study
Putting the Hermle C 32 in the spotlight…
The C 32 can machine workpieces weighing up to 1000kg in five axes simultaneously. The machine uses two axes in the workpiece and three axes in the tool. It offers dynamic positioning, minimal idle times and can accommodate a large range of workholding solutions.