MS40
A machine concept that meets all requirements and the highest demands.
Insights into the MS40
- Highly-dynamic slides with sliding guide (X-axis)
- Non-wearing Z-axis due to quills with hydrodynamic support
- Front-opening machine for bar machining
- Chuck part machining with loading and unloading by robots or linear handling units
- Swing arm is locked by three-piece Hirth coupling in machining position, ensuring maximum rigidity
- Maximum of 6 tools for rear end machining per swiveling synchronous spindle
- Already included: the operating system iXpanel i4.0 readywith 18.5” touch screen and INDEXC200-4D based on Siemens S840D sl
Key Features
| Working Spindles | Number max | 6 |
| Bar capacity | 40mm | |
| Speed max | 7,000rpm | |
| Power max | 24kW | |
| Torque max | 57Nm | |
| Synchronous Spindle | Number max | 2 |
| Bar capacity | 40mm | |
| Speed max | 8,000rpm | |
| Power max | 14kW | |
| Torque max | 22Nm | |
| Slide travel Z | 150mm | |
| Number of tools for backworking | 6 | |
| Tool carrier | Number max | 12 |
| Slide travel X | 73mm | |
| Slide travel Y | 42mm | |
| Slide travel Z | 120mm | |
| Tool carrier, cutoff and back-boring slide | Number max | 2 |
| Slide travel X | 82mm | |
| Number of tools for backworking | 3, (2 of them driven) | |
| Dimensions, weight, connecting power | Weight | 7,100kg |
| Connecting power | 65kW | |
| Control | iXpanel - i4.0 ready | Basis Siemens S840D sl |
| Multi-Touch Screen | 18.5" |